PRODUCT RANGE

Our list of products for different applications

VACCUM OVENS

These units are fitted with highly accurate controller that allows gentle drying of heat sensitive materials & highly hygroscopic materials.

The vacuum ovens can dry faster than the conventional ovens & avoid damage due to rapid temperature overshooting.

They come with a separate vacuum release valve to release the vacuum by gentle turn of the knob. An air release inlet is located below the tray to avoid sample disturbance due to air blowing.

Download

Features

ETHERNET COMMUNICATION :

  • High-speed data transfer
  • Significantly faster than serial(RS-485) communication
  • Global standard for communication protocol
  • No need for a separate PC interface
  • Data Operations from any PC over the LAN

Complete Range of Alarms

  • Temperature & Humidity Deviations
  • Door Opening
  • Water Supply Failure
  • Component Failure
  • Mains Failure

DOCUMENTATION & TRAINING

  • IQ, OQ, PQ
  • Calibration certificates
  • Operations & maintanance manuals
  • GA & Electrical drawings
  • Material test certificates
  • Training to end-users

SAFETY

  • Temperature Overshoot/Undershoot
  • Humidity Overshoot
  • Low water-level
  • Delay Timer to safeguard the Compressor
  • MCB to cut-off over-current supply
  • Standby Controlling Sensor upon failure of Primary
  • In Walk-in chambers door can be open from inside
  • Emergency Bell switch inside the Chamber

ICDAS SOFTWARE

  • 21 CFR Part 11 Ready
  • Single software suitable for upto 20 equipments
  • Automatic daily data back-up
  • Alarm logs. Alarm acknowledgement with e-signatures
  • Audit trails
  • MKT Calculations
  • Graphical viewing & data trending
  • Data export in pdf format
Temperature Range 40°C to 200°C
Temperature Accuracy ± 2°C
The interior and the exterior of the chamber is made of SS 304 with one aluminum rack Vacuum pump connection provided at back of the oven
The door provided with silicon gasket & positive latch to maintain seal at all vaccum levels Heater mounted below the tray, ensures rapid and equal heating without any thermal loss
Door with glass window for viewing of the sample inside the chamber PID controller with integrated timer 0 to 99 hours with one ramp and soak functions
Fitted with highly accurate controller that allows gentle drying of heat sensitive materials avoiding damage due to rapid temperature overshooting Audio/Visual alarms for deviations
Considerable reduction in drying time Settable Temperature deviation alarm limit
Dries faster than the conventional oven Calibrated vacuum gauge and temperature controller
Separate vacuum release valve releasing vacuum by gentle turn of the knob Complete with IQ, OQ, PQ & Operations & Maintenance Manual
Separate vacuum connection valve preventing spilling of oil in the oven

Power supply: 230/415 volts 50 Hz main supply. Also available with 60 Hz Cycle.
ICDAS - A Common Software suitable for 20 nos. Newtronic make equipments High speed Ethernet based communication with Print facility & data storage
Exterior & Interior is of Stainless Steel(SS 304) Capacity Internal Size External Size Tray Qty. Tray size Approx. Weight kg
Cuft. Litres (HxWxD) Mtr (HxWxD) Mtr mm Eqip Ship
NLVO1SE 1 30 275 x 300 x 300 460 x 590 x 425 1 260 x 320 35 65